Please Note: if you have not done this before it can take a few attempts to do this. Once you switch the Nursery Unit ON you only have approx. 10 seconds to complete the process before the light on the Nursery Unit stops flashing. If this happens you will need to begin again.
If you are struggling to re-connect please do call us so that we can talk you through this as it can be a bit fiddly for the first couple of times that you do this.
Re-connecting the Parent Unit & Nursery Unit
Turn the Nursery Unit & Parent Unit OFF
Turn the Nursery Unit ON
With the front of the Nursery Unit facing you quickly press & release the left wing 4 times, the Nightlight on the Nursery Unit will begin to flash
Please Note: The nightlight will flash for approx.10 seconds – you will need to complete the remaining steps whilst the nightlight is flashing. Once this flashing stops, if you have not completed all the steps you will need to begin again
Turn the Parent Unit ON
You will see the blue Angelcare logo on the screen, this is followed by a dark blue screen with just a Nursery Unit Icon and Battery Icon showing – when you see this dark screen PRESS & HOLD the bottom Talkback Button on the front right side of the Parent Unit
Whilst still holding down the Talkback Button quickly PRESS & RELEASE the Power Button on the front left hand side of the Parent Unit
Please Note: Do not press the power button for too long as this will switch the Parent Unit OFF and you will need to begin again
Now release the Talkback Button
A screen link is then shown on the Parent Unit screen
Press the Nursery Unit 1 icon showing on the Parent Unit screen.
Then press the + icon showing on the screen
Then press the x icon showing on the screen
If successful you will see the video capture appear on the Parent Unit screen as the Parent Unit & Nursery Unit are now connected